Cobblemon Server Turn Speed: How to Change Battle Speed

Published on | Updated

Server Turn Speed comes from Cobblemon Battle Extras, not Cobblemon. How to raise it in Cobbleverse or on your server, the config file, and what slows battles.

Illustration of a Minecraft player walking with a Pikachu and a Charmander through a blocky valley

You hovered over the speed button in a Cobblemon battle, saw "Server Turn Speed: 1x" in the popup, and want battles to move faster. Then you searched Cobblemon's config for it and found nothing. That is because the setting is not part of Cobblemon. It belongs to the Cobblemon Battle Extras add-on, which Cobbleverse ships on both the client and the server, and on a server only an operator can change it. This guide shows both ways to change it, what it really speeds up, and what you can do on a server without the add-on. Everything below was checked on 3 November 2026 against the source of Cobblemon 1.8.4, the files of Cobblemon Battle Extras 1.13.45 and the Cobbleverse 1.7.42 pack.

Quick answer: "Server Turn Speed" is a setting of the Cobblemon Battle Extras add-on, not of Cobblemon itself. To increase server turn speed, an operator with permission level 3 or higher opens the Battle Extras settings through Mod Menu and sets Server Settings > Battle Speed to 2x, 3x or 4x; in singleplayer the world needs cheats turned on. You can also stop the server and set battleSpeedMultiplier in config/cobblemon-battle-extras-server.json to any value from 0.5 to 4.0. It shortens Cobblemon's fixed pauses between battle messages, not the move animations. Cobblemon 1.8.4 itself has no turn speed, battle speed or turn timer setting, and no command for one.

Where "Server Turn Speed" Comes From

Cobblemon Battle Extras, by Raguto and Yemagh, adds battle information, a better battle log and controller support to Cobblemon. It also puts a small speed button in the battle screen. Clicking it cycles 1x, 2x, 3x and 4x. Hovering over it opens a "Battle Speed Control" popup with two lines: Client Animation and Server Turn Speed. In the Korean translation the second line reads 서버 턴 속도, in Brazilian Portuguese Velocidade de Turno do Servidor.

Cobbleverse 1.7.42 (21 July 2026), the current version of that modpack, includes Battle Extras 1.13.45 and marks it as required on the server too. It runs Cobblemon 1.7.3 and ships config/cobblemon-battle-extras-server.json with "battleSpeedMultiplier": 1.0, so every new Cobbleverse server starts at 1x.

The two speeds do different things:

Client AnimationServer Turn Speed
Where you set itThe speed button in a battleServer Settings in the Battle Extras config screen, or the server file
Who can change itEvery player, for themselvesOperators with permission level 3 or higher; in singleplayer, a world with cheats on
Values1x to 4x1x to 4x in the menu, 0.5 to 4.0 in the file
What it changesHow fast Pokémon models animate in battle, on your screen onlyCobblemon's fixed waits between battle steps, for every battle on the server
Stored inconfig/cobblemon-battle-extras.json in your game folderconfig/cobblemon-battle-extras-server.json on the server

So the button only changes your own animations. The number that changes the pace for everyone is Server Turn Speed.

How to Increase Server Turn Speed in Cobbleverse

On a server, Battle Extras has to run on the server as well as on your client. Cobbleverse does that. Then:

  1. Make sure you have permission level 3 or higher. /op <name> gives the level set in op-permission-level in server.properties, which is 4 by default, so a normal operator qualifies.
  2. Open the Mods screen from Mod Menu (Cobbleverse includes it), select Cobblemon Battle Extras and click its configure button.
  3. Scroll down to Server Settings and click Battle Speed until it shows 2x, 3x or 4x.

The server saves the choice to config/cobblemon-battle-extras-server.json at once and sends the new value to every player online. Pauses that start after the change use it, so you do not need a restart. In singleplayer the menu offers the option too, but the game still checks for operator rights, so the world needs cheats (Allow Commands) turned on.

If the option will not change, you are not an operator with level 3 or higher, or the server does not run Battle Extras. In that second case the popup keeps showing 1x and only the button for your own animations works.

Change It in the Server Config File

The file sits in the server's main config folder, next to the cobblemon folder. Battle Extras creates it the first time the server starts with the add-on installed:

{
  "hideOpponentPokeballTypes": false,
  "battleSpeedMultiplier": 2.0
}
  • 1.0 is the default. Higher values divide the waits: 2.0 halves them, 4.0 makes them a quarter as long.
  • Values below 1.0 slow battles down, to a minimum of 0.5. Anything outside 0.5 to 4.0 is clamped to that range.
  • Battle Extras reads the file when the server starts. Stop the server, edit, start it again.
  • Players receive the value when they join, so their popup shows the same number.

Make a copy before you edit. If the file is not valid JSON, Battle Extras logs "Failed to load server config, using defaults" and writes a fresh default file over yours. On our Cobblemon server hosting you open the file in the web file manager or over SFTP.

What Server Turn Speed Speeds Up, and What It Doesn't

Cobblemon runs battles on the Pokémon Showdown engine. Showdown works out the turn, then Cobblemon plays the result back as a queue of steps on the server. Two kinds of waits sit in that queue. The timings below come from the Cobblemon 1.8.4 source; Cobbleverse 1.7.42 still runs Cobblemon 1.7.3, where they can differ.

Fixed pauses in Cobblemon's code. After a weather message, an item message or a failed move Cobblemon waits 1.5 seconds. It waits 1 second after an ability message, 0.5 seconds after a faint and 2 seconds after the win or loss message. Battle Extras hooks into these fixed waits and divides them by the multiplier, so at 2x the 1.5-second weather pause becomes 0.75 seconds.

Move animations. Each move plays an "action effect" timeline from Cobblemon's data files, and the next move only starts when the previous timeline is finished. Moves without their own file use generic_move.json: a 1.2-second animation delay, a 0.1-second pause and a 2-second pause, about 3.3 seconds per move. Tackle has its own file with pauses of 1.25 and 1.8 seconds. Battle Extras does not change these timelines, and the Client Animation button only speeds up the models on your own screen.

That is why 4x does not make a battle four times shorter. The message pauses shrink, but the moves keep their length.

Cobblemon 1.8.4 Battle Settings and Where to Change Them

Without Battle Extras, Cobblemon's own options are all there is. These are the keys in the Battles category of config/cobblemon/main.json in 1.8.4, with their defaults:

KeyDefaultWhat it does
autoUpdateShowdowntrueUpdates the bundled Showdown files to the version that comes with your Cobblemon release
defaultFleeDistance32Blocks a player must walk away to flee a non-PvP battle; -1 means no fleeing
allowExperienceFromPvPtrueExperience from PvP battles
experienceShareMultiplier0.5Share of the experience for a Pokémon holding an Exp. Share
awardExperienceToFaintedPokemonfalseExperience for fainted Pokémon that helped win
awardExperienceOnBattleLossfalseExperience for defeated opponents after a loss
luckyEggMultiplier1.5Experience multiplier with a Lucky Egg
allowSpectatingtrueLets players watch battles
battleWildMaxDistance12Maximum distance to start a wild battle
battlePvPMaxDistance32Maximum distance to challenge a player
battleSpectateMaxDistance64Maximum distance to spectate
walkingInBattleAnimationsfalseClient option: walking animations during battle animations

There is no key for a turn timer, battle speed or animation speed, and Cobblemon registers no command for them. One fixed timer does exist around battles: a battle request expires after 20 seconds, and that value is set in the code, not the config. For the full list of battle options, including experience and TM settings, see our Cobblemon battle mechanics guide.

To change these keys on a server, stop it, edit config/cobblemon/main.json and start it again, or run /cobblemonconfig reload as an operator to re-read the file while it runs. The same warning applies as above: Cobblemon saves its config at every start, and if the file has a JSON error it logs that it failed to load the config and saves the defaults over your file.

Shorter Move Animations With a Datapack

Move timelines are server data, loaded from data/<namespace>/action_effects/ in every datapack. Cobblemon names each timeline after its file name, so a datapack file with the same path and name as Cobblemon's own replaces it. To shorten the 2-second pause after every move that has no animation file of its own, create this datapack in your world folder (world unless level-name says otherwise):

world/datapacks/faster-moves/pack.mcmeta
world/datapacks/faster-moves/data/cobblemon/action_effects/moves/generic_move.json

pack.mcmeta for Minecraft 1.21.1 uses data pack format 48:

{
  "pack": {
    "pack_format": 48,
    "description": "Shorter Cobblemon move pauses"
  }
}

For generic_move.json, copy the original from the Cobblemon 1.8.4 jar (same path under data/cobblemon/) or from the Cobblemon repository, and change only the last pause. With the pause lowered from 2 to 1 the file looks like this:

{
  "timeline": [
    { "type": "add_holds", "holds": ["effects"] },
    { "type": "animation", "animation": ["q.move.name", "q.move.damage_category"], "delay": 1.2 },
    {
      "type": "sequence",
      "condition": "q.move.damage_category != 'status'",
      "keyframes": [
        { "type": "entity_sound", "entityCondition": "q.entity.is_user == false && q.missed(q.entity.uuid) == false", "sound": "'cobblemon:impact.' + q.move.type" },
        { "type": "entity_particles", "entityCondition": "q.entity.is_user == false && q.missed(q.entity.uuid) == false", "effect": "'cobblemon:impact_' + q.move.type", "locators": ["target"] },
        { "type": "entity_molang", "expressions": ["q.particle('cobblemon:hit', 'target')"], "entityCondition": "q.entity.is_user == false" }
      ]
    },
    { "type": "pause", "pause": 0.1 },
    { "type": "remove_holds", "holds": ["effects"] },
    { "type": "pause", "pause": 1 }
  ]
}

Restart the server afterwards. Moves with their own file, such as tackle.json, keep their own timing until you override those files the same way. A shorter pause leaves less time for effects to finish before the next move starts, so try it on a copy of the world first, and check the file again after every Cobblemon update.

Low TPS Makes Every Battle Slower

Battles only move forward on server ticks: each tick, Cobblemon advances every running battle once. The animation delays and pauses above also count ticks, because Cobblemon's server timer adds one twentieth of a second per tick. At the normal 20 ticks per second a 2-second pause takes 2 seconds. On a server that only manages 10 ticks per second, the same pause takes 4 seconds, and every move feels twice as slow whatever Server Turn Speed says.

Check the tick rate with /tick query (permission level 3). It shows the target rate and how long recent ticks took. Do not try /tick rate to speed battles up: it changes the speed of the whole game, not just battles.

If ticks are slow, fix the load first. Our Cobblemon server optimization guide covers the usual causes. For memory, our Cobblemon hosting sizing suggests 8 GB for up to 10 players, 12 GB for 10 to 25 players or with sidemods like Mega Showdown, and 16 GB past 25 players.

FAQ

Is there a Cobblemon server turn speed command? No. Cobblemon 1.8.4 has no command for battle or turn speed, and Battle Extras 1.13.45 adds no commands either. Use the Battle Extras config screen or its server file.

What is the highest server turn speed? 4x in the menu and 4.0 in the file. Higher values in the file are clamped to 4.0. The lowest is 0.5, and only through the file.

Why can't I change Server Turn Speed on my server? You need permission level 3 or higher, and Battle Extras must run on the server. Ask the server owner to op you or to set battleSpeedMultiplier in config/cobblemon-battle-extras-server.json.

Does Cobblemon have a turn timer? Not in 1.8.4. The config has no turn timer key and there is no command for one. The one fixed limit is in the code: a battle challenge stays open for 20 seconds.

Does the speed button make battles faster for everyone? No. The button sets Client Animation, which speeds up Pokémon animations in battle on your screen only. Server Turn Speed is the setting that applies to every battle on the server.

Does Battle Extras work with Cobblemon 1.8.4? Its newest release, 1.13.45 from 22 April 2026, came out before Cobblemon 1.8.0 (6 September 2026). Its mod file accepts any Cobblemon from 1.6 up, but it was built before 1.8, so test it on a copy of your server before you add it to a 1.8.4 server.

Sources

All opened on 3 November 2026: