32-player ready · Rated 4.4★
Palworld Server Hosting from EUR 10,20/mo
Dedicated Palworld servers on Ryzen 9 with full 32-player lobbies, REST API, full config control, NVMe SSD, DDoS protection, and instant setup.
Most popular plan
Better valueDEPRESSO
16GB · Up to 16 players
Old monthly price was EUR 27,99
EUR 20,50/mo
3900X
Ryzen 9 CPU
NVMe
Storage
Choose your region below
Location
Pick your region in the plan picker
or compare all plansPalworld 1.0 is live. Our servers run the World Tree, Sky Islands and Server Clustering, on every tier.
Pocketpair's server requirements list 16GB of memory. Read the 1.0 save wipe guide and hardware guide.
Easy Palworld plan selector
Pick the right Palworld server in seconds
Choose by guild size, RAM, and world headroom. DEPRESSO is pre-selected because 16GB is the memory Pocketpair lists for a dedicated server. For a full 32-player lobby, look at PALADIUS or NECROMUS.
Choose the region
Pick the region closest to most of your players.
Choose the hardware line
DDR5 memory and stronger resources. DDoS protection is already included on every plan, including Standard.
Select a plan
Tap RAM/player count first, details stay beside it.
DEPRESSO
Recommended16GB, the memory figure Pocketpair lists on its server requirements page.
Old monthly price was €27,99
€20,50/mo
Up to 16 Players
16GB
Ryzen 9 3900X @ 4.6GHz
Shared CPU
160GB NVMe SSD
Player counts are a recommendation based on RAM. Palworld servers hold up to 32 players.
3 server port allocations included. Up to 5 available on request.
- 2 Backups
- REST API & RCON
- DDoS Protection
- Full Config Access
You can upgrade later if your world gets busier or memory use climbs.
2-5 min delivery
Provisioned automatically after checkout.
Panel included
Console, files, backups, and startup settings.
Easy upgrades
Move up later without rebuilding your server.
Built for Palworld Performance
Every part of our stack is tuned for what Palworld Unreal Engine server actually needs: fast cores, ample RAM, and quick storage.
Ryzen 9 in Every Region
Palworld's Unreal Engine simulation loves fast cores. Every region runs an AMD Ryzen 9: 3900X-class in the Netherlands, Germany, Poland, Canada and India, 7950X3D in the USA, and 5950X in Singapore and Australia. The plan selector shows the chip for the region you pick.
Instant Server Setup
Your Palworld dedicated server is provisioned in minutes. Tune your PalWorldSettings.ini, share the address, and your guild is catching Pals right away.
Game-Grade DDoS Protection
Always-on DDoS mitigation is built into every plan, filtering volumetric and application-layer attacks before they reach your server port.
NVMe SSD Storage
Palworld saves grow large fast. NVMe storage keeps world saves, backups, and level data loading quickly so autosaves never stall your server.
9 Regions to Choose From
The Netherlands, Germany, Poland, Canada, USA (California and Virginia), Singapore, India (Mumbai) and Australia. The plan selector runs a live ping check from your browser, so you can host where your guild gets the lowest ping.
2 Backup Slots
Every plan includes 2 backup slots. Take a backup by hand before a risky change or set one on a schedule, and restore either from the panel. Extra backup slots and automatic off-site backups are optional add-ons at checkout.
Trustpilot · 36 reviews
DDoS protection
Included on every plan
2-5 min
Server delivery time
12/7
Live chat & tickets
Frequently Asked Questions
Common questions about our Palworld server hosting. Can't find what you need? Get in touch.
- Yes. Pick Australia (Sydney) or Singapore in the plan selector. Both cost the same as our European servers, from €10.20 a month for 8 GB RAM. Servers there run on a shared AMD Ryzen 9 5950X with NVMe storage and DDoS protection. For New Zealand, Sydney is our closest location; for Malaysia, Indonesia, the Philippines, Thailand and Vietnam it is Singapore.
- From the panel. Palworld 1.0 came out on 10 July 2026 and Pocketpair has kept shipping patches since. When one lands, take a backup first, then run the update from the panel. If you are still sitting on an Early Access world, our Palworld 1.0 save wipe guide covers whether to carry it over.
- Yes. Before the 10 July 2026 release, Pocketpair said old saves would carry over to 1.0, while recommending a fresh start. If you kept an Early Access world, you can upload it to your server through FTP. Our 1.0 save wipe guide explains the trade-offs.
- Not on paper. Pocketpair's requirements page for version 1.0.4 carries the same memory text as the 0.7.3 page: 16GB, 'Recommended for larger than 32GB', and '8GB is also bootable, but increases the possibility of server crashes due to out of memory.' What grows is your world. Memory use climbs as bases, Pals and structures pile up, so a world that started fine on a smaller plan can need an upgrade months later. See our Palworld 1.0 hardware guide for details.
- Pocketpair's requirements page (version 1.0.4) lists 16GB of memory and adds 'Recommended for larger than 32GB'; the Japanese version of the page words that as 32GB or more for stable operation. It also says '8GB is also bootable, but increases the possibility of server crashes due to out of memory.' Our lineup follows that: LAMBALL (8GB) is the bootable entry point for a small group, DEPRESSO (16GB) is the size Pocketpair lists, and PALADIUS (32GB) and NECROMUS (48GB) are there for full lobbies and long-running worlds.
- Because Pocketpair's requirements page does not go below 8GB, and even 8GB comes with a warning about out-of-memory crashes. So the lineup starts at LAMBALL (8GB). LAMBALL boots and suits a small group on a fresh world, with a higher out-of-memory risk as the world grows. DEPRESSO (16GB) is the size Pocketpair lists.
- At most 32. The Palworld Steam page says a dedicated server 'can allow up to 32 players to play together'. Per plan we recommend: LAMBALL up to 8 players, CHIKIPI up to 12, DEPRESSO up to 16, ANUBIS up to 20, JETRAGON up to 24, PALADIUS up to 32 and NECROMUS up to 32. These are recommendations based on RAM. A world with many bases and Pals needs more memory than a quiet one with the same headcount.
- Yes. You get full access to PalWorldSettings.ini, so you can tune XP rates, capture and breeding rates, day/night length, drop rates, base limits, PvP, and every other multiplier the game exposes. Changes apply on the next restart.
- Both are supported. Use RCON for live admin commands, broadcasts, and player management through any standard RCON client. The built-in REST API is there for automation tools, but Pocketpair notes it is not designed to be exposed directly to the internet, so only switch it on if a tool you use needs it.
- Not server-side mods, at the moment. Our Palworld servers run the Linux dedicated server, and Pocketpair's mod documentation says server-side mods currently work only on the Windows edition of the dedicated server. What you do get is full access to PalWorldSettings.ini plus the built-in REST API and RCON for admin work. Questions about a specific tool? Contact our team.
- Palworld server memory usage climbs over long uptimes. Schedule automatic restarts from the panel to clear it, and move up a plan when your world outgrows its RAM.
- You pick the region in the plan selector: the Netherlands, Germany, Poland, Canada, USA (California), USA (Virginia), Singapore, India (Mumbai) and Australia. The Netherlands, Germany, Poland, Canada, and India Standard nodes run AMD Ryzen 9 3900X-class hardware, the USA (California) and USA (Virginia) nodes run AMD Ryzen 9 7950X3D with DDR5, and Singapore and Australia run AMD Ryzen 9 5950X. The selector also runs a live ping check from your browser to each region, so you can see which one is closest for your group.
- Absolutely. Upload your existing save folder through FTP, point the server to it, and restart. Your bases, Pals, and progression carry straight over from a local co-op world or another host.
- Every plan includes 2 backup slots. Take a backup by hand before a risky change, or set a scheduled task in the panel to make one for you, and restore either from the panel. Need more? Extra Backup Slots (+5) and Automatic Off-Site Backups are optional add-ons at checkout.
- Yes. Upgrade or downgrade anytime from the client panel. Upgrades apply immediately and you only pay the prorated difference, so adding RAM as your world grows is painless.
- Setup is automatic after payment, and most servers are live within a few minutes. We do not offer a money-back guarantee; refunds and cancellations follow our terms of service. You can cancel anytime and keep the server until your billing period ends.
Ready to Launch Your Palworld Server?
Get started in minutes. Ryzen 9 power, 32-player support, DDoS protection, and NVMe SSD included with every plan.